Blue 45º Bends
Blue 45º Injection Moulded Electrofusion Elbows / PN16 / SDR11
Friatec's PE100 RC Injection moulded electrofusion elbows are suitable for fusing pipes from SDR11 to SDR17.6 Electrofusion sockets feature all the same performance benefits found in blue couplers along with built-in reinforcement, so no de-ration is required.
NOTE: The pipe ends and sockets must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes and we recommend using the Friamat fusion control unit to achieve correct preheating and logging the full range of weld data available.
Frialen Blue Electrofusion elbows are made in Germany.
| For larger sizes, use a spigot elbow or bend from the tables below and blue couplers to join. | |||||||
|
Product Code |
dn |
D1 |
L |
L1 |
L2 |
Z |
Availability in Hong Kong |
|
P3326.119.032 |
32 |
43 |
102 |
44 |
21 |
8 |
Ex-Stock |
|
P3326.119.050 |
50 |
66 |
136 |
54 |
32 |
13 |
Ex-Stock |
|
P3326.119.063 |
63 |
82 |
158 |
62 |
34 |
14 |
Ex-Stock |
|
P3326.119.090 |
90 |
115 |
232 |
79 |
45 |
35 |
Ex-Stock |
|
P3326.119.125 |
125 |
157 |
279 |
87 |
44 |
46 |
Ex-Stock |
|
P3326.119.180 |
180 |
228 |
382 |
97 |
65 |
83 |
Ex-Stock |
Blue 45º Injection Moulded Spigot Elbows / PN16 / SDR11
Mill-Pro PE100 RC Injection moulded spigot elbows are manufactured using Mill-Pro's own tooling under our continuous inspection. They feature long spigots for electrofusion joining and built-in reinforcement that exceeds the type testing requirements of BS EN 12201-2 and ISO 4427-3. Mill-Pro fittings feature hard moulded brand, batch numbers for compliance checking and 1D and 2D bar code stickers for complete product traceability. All elbows are sealed in individual plastic bags for protection on site. Spigot fittings are joined by Electrofusion Couplers or Butt Fusion.
NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.
|
Product Code |
dn |
le |
r |
Z |
Availability in Hong Kong |
|
P5826.119.250 |
250 |
132 |
125 |
158 |
Ex-Stock |
|
P5826.119.315 |
315 |
152 |
158 |
198 |
Ex-Stock |
Blue / Purple 45º Segmented Spigot Bends / PN16 / SDR11
Segmented three mitre spigot bends are manufactured from Mill-Pro M10 PE100 RC SDR11 blue or purple pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability. All bends are sealed in individual plastic bags for protection on site.
Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º and therefore are not subject to pressure de-ration factor required in BS EN 12201 Clause B.3. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise.
Any bend angle from 31º to 45º can be custom manufactured, standard angle for a three mitre bend is 45º with a radius of 2.5 x OD.
NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.
| Fabricated bends are made from pipe, so sizes up to dn1000 in PN16/SDR11 rating are available in blue or purple colour. | ||||||
| PN16 Purple | PN16 Blue | dn | le | r = 2.5 dn | z - 45º Triple mitre | Availability in Hong Kong |
| P5K66.287.250 | P5K26.287.250 | 250 | 250 | 625 | 509 | 6-8 weeks |
| P5K66.287.315 | P5K26.287.315 | 315 | 300 | 788 | 626 | 6-8 weeks |
| P5K66.287.355 | P5K26.287.355 | 355 | 300 | 888 | 668 | 6-8 weeks |
| P5K66.287.450 | P5K26.287.450 | 450 | 300 | 1125 | 766 | 6-8 weeks |
| P5K66.287.500 | P5K26.287.500 | 500 | 350 | 1250 | 868 | 6-8 weeks |
| P5K66.287.560 | P5K26.287.560 | 560 | 350 | 1400 | 930 | 6-8 weeks |
| P5K66.287.630 | P5K26.287.630 | 630 | 350 | 1575 | 1002 | 6-8 weeks |
| P5K66.287.710 | P5K26.287.710 | 710 | 350 | 1775 | 1085 | 6-8 weeks |
| P5K66.287.800 | P5K26.287.800 | 800 | 350 | 2000 | 1178 | 6-8 weeks |
| P5K66.287.900 | P5K26.287.900 | 900 | 400 | 2250 | 1332 | 6-8 weeks |
| P5K66.287.1000 | P5K26.287.1000 | 1000 | 400 | 2500 | 1436 | 6-8 weeks |
Blue / Purple 45º Segmented Spigot Bends / PN10 / SDR17
As above for PN16 bends, however, bends are manufactured from Mill-Pro M10E PE100 RC SDR17 blue or purple pipe. hence rated for PN10.
| Fully complies with WSD PS, however only where the engineer allows the use of PN10 fittings. | ||||||
| Sizes ≤ dn1600 and <dn355 available on request. | ||||||
| PN10 Purple | PN10 Blue | dn | le | r = 2.5 dn | z - 45º Triple mitre | Availability in Hong Kong |
| P5K64.287.355 | P5K24.287.355 | 355 | 300 | 888 | 668 | 6-8 weeks |
| P5K64.287.450 | P5K24.287.450 | 450 | 300 | 1125 | 766 | 6-8 weeks |
| P5K64.287.500 | P5K24.287.500 | 500 | 350 | 1250 | 868 | 6-8 weeks |
| P5K64.287.560 | P5K24.287.560 | 560 | 350 | 1400 | 930 | 6-8 weeks |
| P5K64.287.630 | P5K24.287.630 | 630 | 350 | 1575 | 1002 | 6-8 weeks |
| P5K64.287.710 | P5K24.287.710 | 710 | 350 | 1775 | 1085 | 6-8 weeks |
| P5K64.287.800 | P5K24.287.800 | 800 | 350 | 2000 | 1178 | 6-8 weeks |
| P5K64.287.900 | P5K24.287.900 | 900 | 400 | 2250 | 1332 | 6-8 weeks |
| P5K64.287.1000 | P5K24.287.1000 | 1000 | 400 | 2500 | 1436 | 6-8 weeks |
| P5K64.287.1200 | P5K24.287.1200 | 1200 | 400 | 3000 | 1643 | 6-8 weeks |