Blue 11º Bends
Blue 11º Injection Moulded Electrofusion Spigot Elbows / PN16 / SDR11
Friatec's PE100 RC Injection moulded electrofusion elbows are suitable for fusing pipes from SDR11 to SDR17.6 Electrofusion sockets feature all the same performance benefits found in blue couplers. This 11º elbow has an electrofusion socket one end and spigot the other, allowing two elbows to be combined together to provide an adjustable angle from 0º to 22º. All elbows are sealed in individual plastic bags for protection on site.
NOTE: The pipe, socket and spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes and we recommend using the Friamat fusion control unit to achieve correct preheating and logging the full range of weld data available.
| For other sizes, use a spigot elbow or bend from the tables below and blue couplers to join. | ||||||||
|
Product Code |
dn |
D1 |
L |
L1 |
L2 |
le |
Z |
Availability in Hong Kong |
|
P3326.112.125 |
125 |
160 |
250 |
84 |
34 |
87 |
166 |
Ex-Stock |
|
P3326.112.180 |
180 |
226 |
310 |
100 |
50 |
105 |
210 |
Ex-Stock |
Blue 11º Injection Moulded Spigot Elbows / PN16 / SDR11
Mill-Pro PE100 RC Injection moulded spigot elbows are manufactured using Mill-Pro's own tooling under our continuous inspection. They feature long spigots for electrofusion joining and built-in reinforcement that exceeds the type testing requirements of BS EN 12201-2 and ISO 4427-3. Mill-Pro fittings feature hard moulded brand, batch numbers for compliance checking and 1D and 2D bar code stickers for complete product traceability on site. All elbows are sealed in individual plastic bags for protection on site. Spigot fittings are joined by Electrofusion Couplers or Butt Fusion.
NOTE: The pipe and spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.
| For sizes dn125, dn180 use Electrofusion elbows above. | |||||
|
Product Code |
dn |
le |
r |
Z |
Availability in Hong Kong |
|
P5826.112.032 |
32 |
45 |
16 |
47 |
Ex-Stock |
|
P5826.112.050 |
50 |
56 |
25 |
58 |
Ex-Stock |
|
P5826.112.063 |
63 |
65 |
33 |
68 |
Ex-Stock |
|
P5826.112.090 |
90 |
79 |
45 |
83 |
Ex-Stock |
|
P5826.112.250 |
250 |
130 |
125 |
142 |
Ex-Stock |
|
P5826.112.315 |
315 |
150 |
158 |
166 |
Ex-Stock |
Blue / Purple 11º Segmented Spigot Bends / PN16 / SDR11
Mill-Pro's segmented single mitre spigot bends are fabricated from Mill-Pro M10E PE100 RC SDR11 blue or purple pipe in accordance with BS EN 12201-3, Clause B.3, using butt weld techniques to BS ISO 21307. They feature long spigots for electrofusion joining and 1D and 2D bar code stickers for complete product traceability on site. All bends are sealed in individual plastic bags for protection on site.
Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º and therefore are not subject to pressure de-ration factor required in BS EN 12201 Clause B.3. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise.
Any angle from 1º to 15º can be custom manufactured in the sizes and radii indicated below. The standard angle for a single mitre bend is 11º with a radius of 2.5 x OD
NOTE: The pipe and spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.
| Fabricated bends are made from pipe, so sizes up to dn1000 in PN16/SDR11 rating are available in blue or purple colour. | ||||||
| PN16 Purple | PN16 Blue | dn | le | r = 2.5 dn | z - 11º Single mitre | Availability in Hong Kong |
| P5K66.290.250 | P5K26.290.250 | 250 | 250 | 625 | 310 | 6-8 weeks |
| P5K66.290.315 | P5K26.290.315 | 315 | 300 | 788 | 376 | 6-8 weeks |
| P5K66.290.355 | P5K26.290.355 | 355 | 300 | 888 | 385 | 6-8 weeks |
| P5K66.290.450 | P5K26.290.450 | 450 | 300 | 1125 | 408 | 6-8 weeks |
| P5K66.290.500 | P5K26.290.500 | 500 | 350 | 1250 | 470 | 6-8 weeks |
| P5K66.290.560 | P5K26.290.560 | 560 | 350 | 1400 | 485 | 6-8 weeks |
| P5K66.290.630 | P5K26.290.630 | 630 | 350 | 1575 | 502 | 6-8 weeks |
| P5K66.290.710 | P5K26.290.710 | 710 | 350 | 1775 | 521 | 6-8 weeks |
| P5K66.290.800 | P5K26.290.800 | 800 | 350 | 2000 | 543 | 6-8 weeks |
| P5K66.290.900 | P5K26.290.900 | 900 | 400 | 2250 | 617 | 6-8 weeks |
| P5K66.290.1000 | P5K26.290.1000 | 1000 | 400 | 2500 | 641 | 6-8 weeks |
Blue / Purple 11º Segmented Spigot Bends / PN10 / SDR17
As above for PN16 bends, however, bends are manufactured from Mill-Pro M10E PE100 RC SDR17 blue or purple pipe. hence rated for PN10.
| Fully complies with WSD PS, however only where the engineer allows the use of PN10 fittings. | ||||||
| Sizes ≤ dn1600 and <dn355 available on request. | ||||||
| PN10 Purple | PN10 Blue | dn | le | r = 2.5 dn | z - 11º Single mitre | Availability in Hong Kong |
| P5K64.290.355 | P5K24.290.355 | 355 | 300 | 888 | 385 | 6-8 weeks |
| P5K64.290.450 | P5K24.290.450 | 450 | 300 | 1125 | 408 | 6-8 weeks |
| P5K64.290.500 | P5K24.290.500 | 500 | 350 | 1250 | 470 | 6-8 weeks |
| P5K64.290.560 | P5K24.290.560 | 560 | 350 | 1400 | 485 | 6-8 weeks |
| P5K64.290.630 | P5K24.290.630 | 630 | 350 | 1575 | 502 | 6-8 weeks |
| P5K64.290.710 | P5K24.290.710 | 710 | 350 | 1775 | 521 | 6-8 weeks |
| P5K64.290.800 | P5K24.290.800 | 800 | 350 | 2000 | 543 | 6-8 weeks |
| P5K64.290.900 | P5K24.290.900 | 900 | 400 | 2250 | 617 | 6-8 weeks |
| P5K64.290.1000 | P5K24.290.1000 | 1000 | 400 | 2500 | 641 | 6-8 weeks |
| P5K64.290.1200 | P5K24.290.1200 | 1200 | 400 | 3000 | 689 | 6-8 weeks |