60º Bends
60º Segmented Spigot CCTV Bends / PN10 / SDR17 / Twin Stripe
Manufactured from Mill-Pro M90SE PE100 RC SDR17 CCTV pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability.
Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º and therefore are not subject to pressure de-ration factor required in BS EN 12201 Clause B.3. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise.
Any bend angle from 46º to 60º can be custom manufactured, standard angle for a four mitre bend is 60º with a radius of 2.5 x OD, as given in the table below.
NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.
|
Larger sizes to dn2000 in PN ratings from PN4 to PN10 are available in M100E pipe, subject to pipe availability. 60º Bends > dn1600 cannot be containerised as a complete bend. |
||||||
|
Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe. |
||||||
| To transport large bore bends, these may need to be made in sections and joined on site. | ||||||
|
PN10 SDR17 Twin Brown Sewer |
PN10 SDR17 Twin Green Stormwater |
dn |
le |
r = 2.5 dn |
Z - 60º Four mitre |
Availability in Hong Kong |
|
P5Q54.288.110 |
P5QG4.288.110 |
110 |
150 |
275 |
309 |
6-8 weeks |
|
P5Q54.288.125 |
P5QG4.288.125 |
125 |
150 |
313 |
330 |
6-8 weeks |
|
P5Q54.288.160 |
P5QG4.288.160 |
160 |
150 |
400 |
381 |
6-8 weeks |
|
P5Q54.288.225 |
P5QG4.288.225 |
225 |
150 |
563 |
475 |
6-8 weeks |
|
P5Q54.288.250 |
P5QG4.288.250 |
250 |
250 |
625 |
611 |
6-8 weeks |
|
P5Q54.288.280 |
P5QG4.288.280 |
280 |
250 |
700 |
654 |
6-8 weeks |
|
P5Q54.288.355 |
P5QG4.288.355 |
355 |
300 |
888 |
812 |
6-8 weeks |
|
P5Q54.288.400 |
P5QG4.288.400 |
400 |
300 |
1000 |
877 |
6-8 weeks |
|
P5Q54.288.450 |
P5QG4.288.450 |
450 |
300 |
1125 |
950 |
6-8 weeks |
|
P5Q54.288.500 |
P5QG4.288.500 |
500 |
350 |
1250 |
1072 |
6-8 weeks |
|
P5Q54.288.560 |
P5QG4.288.560 |
560 |
350 |
1400 |
1158 |
6-8 weeks |
|
P5Q54.288.630 |
P5QG4.288.630 |
630 |
350 |
1575 |
1259 |
6-8 weeks |
|
P5Q54.288.710 |
P5QG4.288.710 |
710 |
350 |
1775 |
1375 |
6-8 weeks |
|
P5Q54.288.800 |
P5QG4.288.800 |
800 |
350 |
2000 |
1505 |
6-8 weeks |
|
P5Q54.288.900 |
P5QG4.288.900 |
900 |
400 |
2250 |
1699 |
6-8 weeks |
|
P5Q54.288.1000 |
P5QG4.288.1000 |
1000 |
400 |
2500 |
1843 |
6-8 weeks |
|
P5Q54.288.1200 |
P5QG4.288.1200 |
1200 |
400 |
3000 |
2132 |
6-8 weeks |
|
P5Q54.288.1400 |
P5QG4.288.1400 |
1400 |
550 |
3500 |
2571 |
6-8 weeks |
|
P5Q54.288.1600 |
P5QG4.288.1600 |
1600 |
550 |
4000 |
2859 |
6-8 weeks |
60º Segmented Spigot CCTV Bends / PN16 / SDR11 / Twin Stripe
As above, segmented bends fabricated from PN16 / SDR 11 CCTV twin stripe pipe.
| dn1000 is the largest size pipe and therefore is the largest bend size available in PN16/SDR11. | ||||||
| Other PN ratings from PN4 to PN25 are available on request, subject to pipe availability. | ||||||
| Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe. | ||||||
| To transport large bore bends, these may need to be made in sections and joined on site. | ||||||
|
PN16 SDR11 Twin Brown Sewer |
PN16 SDR11 Twin Green Stormwater |
dn |
le |
r = 2.5 dn |
Z - 60º Four mitre |
Availability in Hong Kong |
|
P5Q56.288.110 |
P5QG6.288.110 |
110 |
150 |
275 |
309 |
6-8 weeks |
|
P5Q56.288.125 |
P5QG6.288.125 |
125 |
150 |
313 |
330 |
6-8 weeks |
|
P5Q56.288.160 |
P5QG6.288.160 |
160 |
150 |
400 |
381 |
6-8 weeks |
|
P5Q56.288.225 |
P5QG6.288.225 |
225 |
150 |
563 |
475 |
6-8 weeks |
|
P5Q56.288.250 |
P5QG6.288.250 |
250 |
250 |
625 |
611 |
6-8 weeks |
|
P5Q56.288.280 |
P5QG6.288.280 |
280 |
250 |
700 |
654 |
6-8 weeks |
|
P5Q56.288.355 |
P5QG6.288.355 |
355 |
300 |
888 |
812 |
6-8 weeks |
|
P5Q56.288.400 |
P5QG6.288.400 |
400 |
300 |
1000 |
877 |
6-8 weeks |
|
P5Q56.288.450 |
P5QG6.288.450 |
450 |
300 |
1125 |
950 |
6-8 weeks |
|
P5Q56.288.500 |
P5QG6.288.500 |
500 |
350 |
1250 |
1072 |
6-8 weeks |
|
P5Q56.288.560 |
P5QG6.288.560 |
560 |
350 |
1400 |
1158 |
6-8 weeks |
|
P5Q56.288.630 |
P5QG6.288.630 |
630 |
350 |
1575 |
1259 |
6-8 weeks |
|
P5Q56.288.710 |
P5QG6.288.710 |
710 |
350 |
1775 |
1375 |
6-8 weeks |
|
P5Q56.288.800 |
P5QG6.288.800 |
800 |
350 |
2000 |
1505 |
6-8 weeks |
|
P5Q56.288.900 |
P5QG6.288.900 |
900 |
400 |
2250 |
1699 |
6-8 weeks |
|
P5Q56.288.1000 |
P5QG6.288.1000 |
1000 |
400 |
2500 |
1843 |
6-8 weeks |
Black 60º Fabricated Spigot Elbows / PN10-PN16 / SDR17-SDR11
Fabricated elbows are manufactured from black PE100+ compound. They are manufactured by factory butt welding two 30º fabricated elbows together. They feature long spigots for electrofusion or butt fusion joining on site. Any fabricated elbow angle from 1º to 90º can be manufactured. Tables below shows dimensions for two 30º elbows factory butt welded together to give a 60º elbow with a radius of ~0.5xOD.
| Custom fabricated elbows do not require pipe to manufacture. Individual elbows may be ordered in any angle. | ||||||
| PN10 SDR17 | PN16 SDR11 | dn | le | r | z - 60º | Availability in Hong Kong |
| P5314.80.355 | P5316.80.355 | 355 | 200 | 177 | 485 | 14-16 weeks |
| P5314.80.400 | P5316.80.400 | 400 | 300 | 200 | 600 | 14-16 weeks |
| P5314.80.450 | P5316.80.450 | 450 | 300 | 225 | 614 | 14-16 weeks |
| P5314.80.500 | P5316.80.500 | 500 | 350 | 250 | 697 | 14-16 weeks |
| P5314.80.560 | P5316.80.560 | 560 | 350 | 280 | 760 | 14-16 weeks |
| P5314.80.630 | P5316.80.630 | 630 | 350 | 315 | 791 | 14-16 weeks |
| P5314.80.710 | P5316.80.710 | 710 | 500 | 355 | 961 | 14-16 weeks |
| P5314.80.800 | P5316.80.800 | 800 | 500 | 400 | 980 | 14-16 weeks |
| P5314.80.900 | P5316.80.900 | 900 | 500 | 450 | 1137 | 14-16 weeks |
| P5314.80.1000 | P5316.80.1000 | 1000 | 500 | 500 | 1174 | 14-16 weeks |
| P5314.80.1200 | - | 1200 | 500 | 600 | 1149 | 14-16 weeks |
| P5314.80.1400 | - | 1400 | 500 | 700 | 1324 | 14-16 weeks |
Four Mitre Custom Segment Spigot Bends / PN4-25 / SDR41-7.4
As above, three mitre segmented bends are manufactured from pipes supplied for the contract, such as M90SE or M100E, in any angle from 31º to 45º with radii from 1.5 - 2.5xOD. Bend sizes are only limited by the pipes size and rating. See M100 pipe tables for the maximum pipe DN/OD at a given SDR rating. Contact us for specific requirements.
Note: 60º Bends > dn1600, where r=2.5xOD, cannot be containerised as a complete bend.
