30º Bends
30º Segmented Spigot CCTV Bends / PN10 / SDR17 / Twin Stripe
Manufactured from Mill-Pro M90SE PE100 RC SDR17 CCTV pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability.
Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º and therefore are not subject to pressure de-ration factor required in BS EN 12201 Clause B.3. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise.
Any bend angle from 16º to 30º can be custom manufactured, standard angle for a single mitre bend is 30º with a radius of 2.5 x OD, as given in the table below.
NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.
| Larger sizes to dn2000 in PN ratings from PN4 to PN10 are available in M100E pipe, subject to pipe availability. | ||||||
| Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe. | ||||||
| To transport large bore bends, these may need to be made in sections and joined on site. | ||||||
| SDR17 PN10 Twin Brown Sewer | SDR17 PN10 Twin Green Stormwater | dn | le | r = 2.5 dn | Z - 30º Two mitre | Availability in Hong Kong |
| P5Q54.286.110 | P5QG4.286.110 | 110 | 150 | 275 | 224 | 6-8 Weeks |
| P5Q54.286.160 | P5QG4.286.160 | 160 | 150 | 400 | 257 | 6-8 Weeks |
| P5Q54.286.225 | P5QG4.286.225 | 225 | 150 | 563 | 301 | 6-8 Weeks |
| P5Q54.286.250 | P5QG4.286.250 | 250 | 250 | 625 | 417 | 6-8 Weeks |
| P5Q54.286.280 | P5QG4.286.280 | 280 | 250 | 700 | 438 | 6-8 Weeks |
| P5Q54.286.355 | P5QG4.286.355 | 355 | 300 | 888 | 538 | 6-8 Weeks |
| P5Q54.286.400 | P5QG4.286.400 | 400 | 300 | 1000 | 568 | 6-8 Weeks |
| P5Q54.286.450 | P5QG4.286.450 | 450 | 300 | 1125 | 601 | 6-8 Weeks |
| P5Q54.286.500 | P5QG4.286.500 | 500 | 350 | 1250 | 685 | 6-8 Weeks |
| P5Q54.286.560 | P5QG4.286.560 | 560 | 350 | 1400 | 725 | 6-8 Weeks |
| P5Q54.286.630 | P5QG4.286.630 | 630 | 350 | 1575 | 772 | 6-8 Weeks |
| P5Q54.286.710 | P5QG4.286.710 | 710 | 350 | 1775 | 826 | 6-8 Weeks |
| P5Q54.286.800 | P5QG4.286.800 | 800 | 350 | 2000 | 886 | 6-8 Weeks |
| P5Q54.286.900 | P5QG4.286.900 | 900 | 400 | 2250 | 1003 | 6-8 Weeks |
| P5Q54.286.1000 | P5QG4.286.1000 | 1000 | 400 | 2500 | 1070 | 6-8 Weeks |
| P5Q54.286.1200 | P5QG4.286.1200 | 1200 | 400 | 3000 | 1204 | 6-8 Weeks |
| P5Q54.286.1400 | P5QG4.286.1400 | 1400 | 550 | 3500 | 1488 | 6-8 Weeks |
| P5Q54.286.1600 | P5QG4.286.1600 | 1600 | 550 | 4000 | 1622 | 6-8 Weeks |
30º Segmented Spigot CCTV Bends / PN16 / SDR11 / Twin Stripe
Black segmented spigot bends are available in all sizes and pressure ratings.
| dn1000 is the largest size pipe and therefore is the largest bend size available in PN16/SDR11. | ||||||
| Other PN ratings from PN4 to PN25 are available on request, subject to pipe availability. | ||||||
| Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe. | ||||||
| To transport large bore bends, these may need to be made in sections and joined on site. | ||||||
| PN16 SDR11 Twin Brown Sewer | PN16 SDR11 Twin Green Stormwater | dn | le | r = 2.5 dn | Z - 30º Two mitre | Availability in Hong Kong |
| P5Q56.286.110 | P5QG6.286.110 | 110 | 150 | 275 | 224 | 6-8 Weeks |
| P5Q56.286.160 | P5QG6.286.160 | 160 | 150 | 400 | 257 | 6-8 Weeks |
| P5Q56.286.225 | P5QG6.286.225 | 225 | 150 | 563 | 301 | 6-8 Weeks |
| P5Q56.286.250 | P5QG6.286.250 | 250 | 250 | 625 | 417 | 6-8 Weeks |
| P5Q56.286.280 | P5QG6.286.280 | 280 | 250 | 700 | 438 | 6-8 Weeks |
| P5Q56.286.355 | P5QG6.286.355 | 355 | 300 | 888 | 538 | 6-8 Weeks |
| P5Q56.286.400 | P5QG6.286.400 | 400 | 300 | 1000 | 568 | 6-8 Weeks |
| P5Q56.286.450 | P5QG6.286.450 | 450 | 300 | 1125 | 601 | 6-8 Weeks |
| P5Q56.286.500 | P5QG6.286.500 | 500 | 350 | 1250 | 685 | 6-8 Weeks |
| P5Q56.286.560 | P5QG6.286.560 | 560 | 350 | 1400 | 725 | 6-8 Weeks |
| P5Q56.286.630 | P5QG6.286.630 | 630 | 350 | 1575 | 772 | 6-8 Weeks |
| P5Q56.286.710 | P5QG6.286.710 | 710 | 350 | 1775 | 826 | 6-8 Weeks |
| P5Q56.286.800 | P5QG6.286.800 | 800 | 350 | 2000 | 886 | 6-8 Weeks |
| P5Q56.286.900 | P5QG6.286.900 | 900 | 400 | 2250 | 1003 | 6-8 Weeks |
| P5Q56.286.1000 | P5QG6.286.1000 | 1000 | 400 | 2500 | 1070 | 6-8 Weeks |
Black 30º Injection Moulded Electrofusion Elbows / PN16 / SDR11
Friatec's PE100 RC Injection moulded electrofusion elbows are suitable for fusing pipes from SDR11 to SDR17.6 Electrofusion sockets feature all the same performance benefits found in black couplers along with built-in reinforcement, so no de-ration is required.
NOTE: The pipe ends and sockets must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes and we recommend using the Friamat fusion control unit to achieve correct preheating and logging the full range of weld data available.
Frialen Black Electrofusion elbows are made in Germany.
|
Product Code |
dn |
D1 |
L |
L1 |
L2 |
Z |
Availability in Hong Kong |
|
P3316.111.090 |
90 |
115 |
224 |
72 |
43 |
24 |
8-12 Weeks |
|
P3316.111.110 |
110 |
142 |
252 |
83 |
47 |
27 |
8-12 Weeks |
|
P3316.111.125 |
125 |
158 |
270 |
85 |
51 |
30 |
8-12 Weeks |
|
P3316.111.160 |
160 |
199 |
350 |
96 |
59 |
40 |
8-12 Weeks |
|
P3316.111.180 |
180 |
229 |
390 |
101 |
57 |
79 |
8-12 Weeks |
|
P3316.111.200 |
200 |
254 |
412 |
106 |
54 |
84 |
8-12 Weeks |
|
P3316.111.225 |
225 |
281 |
456 |
123 |
64 |
86 |
8-12 Weeks |
Black 30º Fabricated Spigot Elbows / PN10-PN16 / SDR17-SDR11
Fabricated elbows have a fitting body that is machined from black PE100+ hollow bar with the required reinforcement included in the design. They feature long spigots for electrofusion or butt fusion joining on site. Any fabricated elbow angle from 1º to 90º can be manufactured. Tables below show standard 30º elbow with a radius of ~0.5xOD for reference.
| Custom fabricated elbows do not require pipe to manufacture. Individual elbows may be ordered in any angle. | ||||||
| PN10 SDR17 | PN16 SDR11 | dn | le | r | z - 30º | Availability in Hong Kong |
| P5314.78.355 | P5316.78.355 | 355 | 200 | 177 | 339 | 14-16 weeks |
| P5314.78.400 | P5316.78.400 | 400 | 300 | 200 | 446 | 14-16 weeks |
| P5314.78.450 | P5316.78.450 | 450 | 300 | 225 | 452 | 14-16 weeks |
| P5314.78.500 | P5316.78.500 | 500 | 350 | 250 | 518 | 14-16 weeks |
| P5314.78.560 | P5316.78.560 | 560 | 350 | 280 | 549 | 14-16 weeks |
| P5314.78.630 | P5316.78.630 | 630 | 350 | 315 | 564 | 14-16 weeks |
| P5314.78.710 | P5316.78.710 | 710 | 500 | 355 | 723 | 14-16 weeks |
| P5314.78.800 | P5316.78.800 | 800 | 500 | 400 | 731 | 14-16 weeks |
| P5314.78.900 | P5316.78.900 | 900 | 500 | 450 | 809 | 14-16 weeks |
| P5314.78.1000 | P5316.78.1000 | 1000 | 500 | 500 | 827 | 14-16 weeks |
| P5314.78.1200 | - | 1200 | 500 | 600 | 812 | 14-16 weeks |
| P5314.78.1400 | - | 1400 | 500 | 700 | 898 | 14-16 weeks |
Two Mitre Custom Segmented Spigot Bends / PN4-25 / SDR41-7.4
As above, single mitre segmented bends are manufactured from pipes supplied for the contract, such as M90SE or M100E, in any angle from 16º to 30º with radii from 1.5 - 2.5xOD. Bend sizes are only limited by the pipes size and rating. See M100 pipe tables for the maximum pipe DN/OD at a given SDR rating. Contact us for specific bend requirements.
