22º Bends
22º Segmented Spigot CCTV Bends / PN10 / SDR17 / Twin Stripe
Manufactured from Mill-Pro M90SE PE100 RC SDR17 CCTV pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability.
Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º and therefore are not subject to pressure de-ration factor required in BS EN 12201 Clause B.3. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise.
Any bend angle from 16º to 30º can be custom manufactured, standard angle for a two mitre bend is 22º with a radius of 2.5 x OD, as given in the table below.
NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.
| Larger sizes to dn2000 in PN ratings from PN4 to PN10 are available in M100E pipe, subject to pipe availability. | ||||||
| Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe. | ||||||
| To transport large bore bends, these may need to be made in sections and joined on site. | ||||||
| PN10 SDR17 Twin Brown Sewer | PN10 SDR17 Twin Green Stormwater | dn | le | r = 2.5 dn | Z - 22º Two mitre | Availability in Hong Kong |
| P5Q54.285.110 | P5QG4.285.110 | 110 | 150 | 275 | 203 | 6-8 Weeks |
| P5Q54.285.160 | P5QG4.285.160 | 160 | 150 | 400 | 228 | 6-8 Weeks |
| P5Q54.285.225 | P5QG4.285.225 | 225 | 150 | 563 | 259 | 6-8 Weeks |
| P5Q54.285.250 | P5QG4.285.250 | 250 | 250 | 625 | 371 | 6-8 Weeks |
| P5Q54.285.280 | P5QG4.285.280 | 280 | 250 | 700 | 386 | 6-8 Weeks |
| P5Q54.285.355 | P5QG4.285.355 | 355 | 300 | 888 | 473 | 6-8 Weeks |
| P5Q54.285.400 | P5QG4.285.400 | 400 | 300 | 1000 | 494 | 6-8 Weeks |
| P5Q54.285.450 | P5QG4.285.450 | 450 | 300 | 1125 | 519 | 6-8 Weeks |
| P5Q54.285.500 | P5QG4.285.500 | 500 | 350 | 1250 | 593 | 6-8 Weeks |
| P5Q54.285.560 | P5QG4.285.560 | 560 | 350 | 1400 | 622 | 6-8 Weeks |
| P5Q54.285.630 | P5QG4.285.630 | 630 | 350 | 1575 | 656 | 6-8 Weeks |
| P5Q54.285.710 | P5QG4.285.710 | 710 | 350 | 1775 | 695 | 6-8 Weeks |
| P5Q54.285.800 | P5QG4.285.800 | 800 | 350 | 2000 | 739 | 6-8 Weeks |
| P5Q54.285.900 | P5QG4.285.900 | 900 | 400 | 2250 | 837 | 6-8 Weeks |
| P5Q54.285.1000 | P5QG4.285.1000 | 1000 | 400 | 2500 | 886 | 6-8 Weeks |
| P5Q54.285.1200 | P5QG4.285.1200 | 1200 | 400 | 3000 | 983 | 6-8 Weeks |
| P5Q54.285.1400 | P5QG4.285.1400 | 1400 | 550 | 3500 | 1230 | 6-8 Weeks |
| P5Q54.285.1600 | P5QG4.285.1600 | 1600 | 550 | 4000 | 1328 | 6-8 Weeks |
22º Segmented Spigot CCTV Bends / PN16 / SDR11 / Twin Stripe
As above, segmented bends fabricated from PN16 / SDR 11 CCTV twin stripe pipe
| dn1000 is the largest size pipe and therefore is the largest bend size available in PN16/SDR11. | ||||||
| Other PN ratings from PN4 to PN25 are available on request, subject to pipe availability. | ||||||
| Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe. | ||||||
| To transport large bore bends, these may need to be made in sections and joined on site. | ||||||
| PN16 SDR11 Twin Brown Sewer | PN16 SDR11 Twin Green Stormwater | dn | le | r = 2.5 dn | Z - 22º Two mitre | Availability in Hong Kong |
| P5Q56.285.110 | P5QG6.285.110 | 110 | 150 | 275 | 203 | 6-8 Weeks |
| P5Q56.285.160 | P5QG6.285.160 | 160 | 150 | 400 | 228 | 6-8 Weeks |
| P5Q56.285.225 | P5QG6.285.225 | 225 | 150 | 563 | 259 | 6-8 Weeks |
| P5Q56.285.250 | P5QG6.285.250 | 250 | 250 | 625 | 371 | 6-8 Weeks |
| P5Q56.285.280 | P5QG6.285.280 | 280 | 250 | 700 | 386 | 6-8 Weeks |
| P5Q56.285.355 | P5QG6.285.355 | 355 | 300 | 888 | 473 | 6-8 Weeks |
| P5Q56.285.400 | P5QG6.285.400 | 400 | 300 | 1000 | 494 | 6-8 Weeks |
| P5Q56.285.450 | P5QG6.285.450 | 450 | 300 | 1125 | 519 | 6-8 Weeks |
| P5Q56.285.500 | P5QG6.285.500 | 500 | 350 | 1250 | 593 | 6-8 Weeks |
| P5Q56.285.560 | P5QG6.285.560 | 560 | 350 | 1400 | 622 | 6-8 Weeks |
| P5Q56.285.630 | P5QG6.285.630 | 630 | 350 | 1575 | 656 | 6-8 Weeks |
| P5Q56.285.710 | P5QG6.285.710 | 710 | 350 | 1775 | 695 | 6-8 Weeks |
| P5Q56.285.800 | P5QG6.285.800 | 800 | 350 | 2000 | 739 | 6-8 Weeks |
| P5Q56.285.900 | P5QG6.285.900 | 900 | 400 | 2250 | 837 | 6-8 Weeks |
| P5Q56.285.1000 | P5QG6.285.1000 | 1000 | 400 | 2500 | 886 | 6-8 Weeks |
Black 22º Fabricated spigot elbows PN10-PN16 / SDR17-SDR11
Fabricated elbows are designed for applications where there is insufficient space for segmented bends to be used. Manufactured from black PE100+ compound, they feature long spigots for electrofusion or butt fusion joining on site. Any fabricated elbow angle from 1º to 45º can be manufactured. Tables below show standard 22º elbow with a radius of ~0.5xOD.
| Custom fabricated elbows do not require pipe to manufacture. Individual elbows may be ordered in any angle. | ||||||
| PN10 SDR17 | PN16 SDR11 | dn | le | r | z - 22º | Availability in Hong Kong |
| P5314.77.355 | P5316.77.355 | 355 | 200 | 177 | 326 | 14-16 weeks |
| P5314.77.400 | P5316.77.400 | 400 | 300 | 200 | 431 | 14-16 weeks |
| P5314.77.450 | P5316.77.450 | 450 | 300 | 225 | 436 | 14-16 weeks |
| P5314.77.500 | P5316.77.500 | 500 | 350 | 250 | 500 | 14-16 weeks |
| P5314.77.560 | P5316.77.560 | 560 | 350 | 280 | 528 | 14-16 weeks |
| P5314.77.630 | P5316.77.630 | 630 | 350 | 315 | 541 | 14-16 weeks |
| P5314.77.710 | P5316.77.710 | 710 | 500 | 355 | 697 | 14-16 weeks |
| P5314.77.800 | P5316.77.800 | 800 | 500 | 400 | 702 | 14-16 weeks |
| P5314.77.900 | P5316.77.900 | 900 | 500 | 450 | 776 | 14-16 weeks |
| P5314.77.1000 | P5316.77.1000 | 1000 | 500 | 500 | 790 | 14-16 weeks |
| P5314.77.1200 | - | 1200 | 500 | 600 | 768 | 14-16 weeks |
| P5314.77.1400 | - | 1400 | 500 | 700 | 846 | 14-16 weeks |
Two Mitre Custom Segment Spigot Bends / PN4-25 / SDR41-7.4
As above, single mitre segmented bends are manufactured from pipes supplied for the contract, such as M90SE or M100E, in any angle from 16º to 30º with radii from 1.5 - 2.5xOD. Bend sizes are only limited by the pipes size and rating. See M100 pipe tables for the maximum pipe DN/OD at a given SDR rating. Contact us for specific bend requirements.
