Pulling Eyes
The Reinert Ritz pulling head transfers the tensile forces created when performing a Directional Drill (HDD) pullback or forces from insertion winching into the pipe and ensures that the pipe is pulled in without risk of pulling head failure. These fusion butt weld pulling eyes are available for axial pulling forces of up to 500 kN.
| d1/dn | le1 | LPE | Force max Kn | di | Thread pulling eye | kg |
| 110 | 104 | 125 | 117 | 28 | M30 | 2.6 |
| 125 | 116 | 150 | 117 | 28 | M30 | 3.1 |
| 160 | 103 | 150 | 120 | 60 | M30 | 5.0 |
| 180 | 112 | 150 | 120 | 60 | M30 | 6.4 |
| 200 | 160 | 200 | 120 | 60 | M30 | 9.1 |
| 225 | 160 | 200 | 120 | 60 | M30 | 12.2 |
| 250 | 160 | 200 | 120 | 60 | M30 | 19.0 |
| 280 | 155 | 200 | 160 | 90 | M36 | 25.4 |
| 315 | 200 | 270 | 160 | 90 | M36 | 29.9 |
| 355 | 180 | 250 | 160 | 90 | M36 | 37.9 |
| 400 | 209 | 300 | 160 | 90 | M36 | 45.7 |
| 450 | 230 | 300 | 240 | 90 | M42 | 71.9 |
| 500 | 295 | 370 | 320 | 90 | M48 | 86.7 |
| 560 | 300 | 400 | 320 | 90 | M48 | 103.1 |
| 630 | 340 | 450 | 320 | 90 | M48 | 130.2 |
