45º Bends

45º Swept Bends LS / PE100RC / M90ES / SDR17 / SN24

Brown stripe Green stripe dn le r = 7 x dn z - 45º Availability in Hong Kong
P5M5E.383.225 P5MGE.383.225 225 150 1575 802 6-8 weeks
P5M5E.383.250 P5MGE.383.250 250 250 1750 975 6-8 weeks
P5M5E.383.280 P5MGE.383.280 280 250 1960 1062 6-8 weeks
P5M5E.383.355 P5MGE.383.355 355 300 2485 1329 6-8 weeks
P5M5E.383.400 P5MGE.383.400 400 300 2800 1460 6-8 weeks

45º Segmented Spigot CCTV Bends / SN24 / SDR17 / Striped

Manufactured from Mill-Pro M90SE PE100 RC SDR17 CCTV pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability.

Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º and therefore are not subject to pressure de-ration factor required in BS EN 12201 Clause B.3. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise. 

Any bend angle from 31º to 45º can be custom manufactured, standard angle for a three mitre bend is 45º with a radius of 2.5 x OD, as given in the table below.

NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.

Larger sizes to dn2000 in PN ratings from PN4 to PN10 are available in M100E pipe, subject to pipe availability.
Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe.
To transport large bore bends, these may need to be made in sections and joined on site.
Brown stripe Green stripe dn le r = 7.0 dn z - 45º Three mitre Availability in Hong Kong
P5M5E.248.560 P5MGE.248.560 560 350 3920 1974 6-8 weeks
P5M5E.248.630 P5MGE.248.630 630 350 4410 2177 6-8 weeks
P5M5E.248.710 P5MGE.248.710 710 350 4970 2409 6-8 weeks
P5M5E.248.800 P5MGE.248.800 800 350 5600 2670 6-8 weeks
P5M5E.248.900 P5MGE.248.900 900 400 6300 3010 6-8 weeks
P5M5E.248.1000 P5MGE.248.1000 1000 400 7000 3299 6-8 weeks
P5M5E.248.1200 P5MGE.248.1200 1200 400 8400 3879 6-8 weeks
P5M5E.248.1400 P5MGE.248.1400 1400 550 9800 4609 6-8 weeks
P5M5E.248.1600 P5MGE.248.1600 1600 550 11200 5189 6-8 weeks

 

Three Mitre Custom Segment Spigot Bends / PN4-25 / SDR41-7.4

As above, three mitre segmented bends are manufactured from pipes supplied for the contract, such as M90SE or M100E, in any angle from 31º to 45º with radii from 1.5 - 2.5xOD. Bend sizes are only limited by the pipes size and rating. See M100 pipe tables for the maximum pipe DN/OD at a given SDR rating. Contact us for specific requirements.