22º Bends

22º Swept Bends LS / PE100RC / M90ES / SDR17 / SN24

Brown Stripe Green Stripe dn le r = 4.5 x dn z - 22º Availability in Hong Kong
P5M5E.361.110 P5MGE.361.110 110 150 495 350 6-8 weeks
P5M5E.361.160 P5MGE.361.160 160 150 720 441 6-8 weeks
P5M5E.361.225 P5MGE.361.225 225 150 1013 559 6-8 weeks
P5M5E.361.250 P5MGE.361.250 250 250 1125 705 6-8 weeks
Brown stripe Green stripe dn le r = 4 x dn z - 22º Availability in Hong Kong
P5M5E.351.280 P5MGE.351.280 280 250 1120 468 6-8 weeks
P5M5E.351.355 P5MGE.351.355 355 300 1420 576 6-8 weeks
P5M5E.351.400 P5MGE.351.400 400 300 1600 611 6-8 weeks
P5M5E.351.450 P5MGE.351.450 450 300 1800 650 6-8 weeks
P5M5E.351.500 P5MGE.351.500 500 350 2000 739 6-8 weeks

22º Swept Spigot CCTV Bends / SN24 / SDR17 / Striped

content to be added

22º Segmented Spigot CCTV Bends / SN24 / SDR17 / Striped

Manufactured from Mill-Pro M90SE PE100 RC SDR17 CCTV pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability.

Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise. 

Any bend angle from 16º to 30º can be custom manufactured, standard angle for a two mitre bend is 22º with a radius of ≥ 4 x OD, as given in the table below.

Larger sizes to dn2000 in PN ratings from PN4 to PN10 are available in M100E pipe, subject to pipe availability.
Bends with brown or green twin stripes can only be supplied when also supplying the matching pipe.
To transport large bore bends, these may need to be made in sections and joined on site.
Brown stripe Green stripe dn le r = 4.0 dn z - 22º Two mitre Availability in Hong Kong
P5M5E.241.560 P5MGE.241.560 560 350 2240 785 6-8 weeks
P5M5E.241.630 P5MGE.241.630 630 350 2520 840 6-8 weeks
P5M5E.241.710 P5MGE.241.710 710 350 2840 902 6-8 weeks
P5M5E.241.800 P5MGE.241.800 800 350 3200 972 6-8 weeks
P5M5E.241.900 P5MGE.241.900 900 400 3600 1100 6-8 weeks
P5M5E.241.1000 P5MGE.241.1000 1000 400 4000 1178 6-8 weeks
P5M5E.241.1200 P5MGE.241.1200 1200 400 4800 1333 6-8 weeks
P5M5E.241.1400 P5MGE.241.1400 1400 550 5600 1639 6-8 weeks
P5M5E.241.1600 P5MGE.241.1600 1600 550 6400 1794 6-8 weeks

 

 

 

Two Mitre Custom Segment Spigot Bends / SN3-381 / SDR33-7.4

As above, single mitre segmented bends are manufactured from pipes supplied for the contract, such as M90SE or M100E, in any angle from 16º to 30º with radii ≥ 4 x OD. Bend sizes are only limited by the pipes size and rating. See M100 pipe tables for the maximum pipe DN/OD at a given SDR rating. Contact us for specific bend requirements.