11º Bends
11º Swept Bends LS / PE100RC / M90ES / SDR17 / SN24
| Brown stripe | Green stripe | dn | le | r = 4.5 x dn | z - 11º | Availability in Hong Kong |
| P5M5E.360.110 | P5MGE.360.110 | 110 | 150 | 495 | 198 | 6-8 weeks |
| P5M5E.360.160 | P5MGE.360.160 | 160 | 150 | 720 | 219 | 6-8 weeks |
| P5M5E.360.225 | P5MGE.360.225 | 225 | 150 | 1013 | 247 | 6-8 weeks |
| P5M5E.360.250 | P5MGE.360.250 | 250 | 250 | 1125 | 358 | 6-8 weeks |
| Brown stripe | Green stripe | dn | le | r = 4 x dn | z - 11º | Availability in Hong Kong |
| P5M5E.350.280 | P5MGE.350.280 | 280 | 250 | 1120 | 358 | 6-8 weeks |
| P5M5E.350.355 | P5MGE.350.355 | 355 | 300 | 1420 | 437 | 6-8 weeks |
| P5M5E.350.400 | P5MGE.350.400 | 400 | 300 | 1600 | 454 | 6-8 weeks |
| P5M5E.350.450 | P5MGE.350.450 | 450 | 300 | 1800 | 473 | 6-8 weeks |
| P5M5E.350.500 | P5MGE.350.500 | 500 | 350 | 2000 | 543 | 6-8 weeks |
11º Swept Spigot CCTV Bends / SN24 / SDR17 / Striped
To be added
11º Segmented Spigot CCTV Bends / SN24 / SDR17 / Striped
Manufactured from Mill-Pro M90SE PE100 RC SDR17 CCTV pipe and fabricated according to BS EN 12201-3, clause B.3, using butt weld techniques according to BS ISO 21307. They feature long spigots for electrofusion or butt fusion joining and 1D and 2D bar code stickers for complete product traceability.
Segmented bends are manufactured from a pipe, with cut angles ≤ 7.5º. Generally, the internal weld beads are removed where possible and external weld beads are not removed unless ordered otherwise.
Any bend angle from 0º to 15º can be custom manufactured, standard angle for a single mitre bend is 11º with a radius of ≥ 4 x OD, as given in the table below.
NOTE: The spigot ends must be prepared in accordance with the general installation instructions using a spigot mechanical peeler, 90% Isopropyl alcohol wipes.
| Larger sizes to dn2000 in SN ratings from SN3 to SN381 are available in M100E pipe, subject to pipe availability. | ||||||
| Bends with brown or green stripes can only be supplied when also supplying the matching pipe. | ||||||
| To transport large bore bends, these may need to be made in sections and joined on site. | ||||||
| Brown stripe | Green stripe | dn | le | r = 4.0 dn | z - 11º Single mitre | Availability in Hong Kong |
| P5M5E.240.560 | P5MGE.240.560 | 560 | 350 | 2240 | 566 | 6-8 weeks |
| P5M5E.240.630 | P5MGE.240.630 | 630 | 350 | 2520 | 593 | 6-8 weeks |
| P5M5E.240.710 | P5MGE.240.710 | 710 | 350 | 2840 | 623 | 6-8 weeks |
| P5M5E.240.800 | P5MGE.240.800 | 800 | 350 | 3200 | 658 | 6-8 weeks |
| P5M5E.240.900 | P5MGE.240.900 | 900 | 400 | 3600 | 747 | 6-8 weeks |
| P5M5E.240.1000 | P5MGE.240.1000 | 1000 | 400 | 4000 | 785 | 6-8 weeks |
| P5M5E.240.1200 | P5MGE.240.1200 | 1200 | 400 | 4800 | 862 | 6-8 weeks |
| P5M5E.240.1400 | P5MGE.240.1400 | 1400 | 550 | 5600 | 1089 | 6-8 weeks |
| P5M5E.240.1600 | P5MGE.240.1600 | 1600 | 550 | 6400 | 1166 | 6-8 weeks |
Single Mitre Custom Segmented Spigot Bends / SN3-381 / SDR33-7.4
As above, single mitre segmented bends are manufactured from pipes supplied for the contract, such as M90SE or M100E, in any angle from 1º to 15º with radii ≥ 4 x OD. Bend sizes are only limited by the pipes size and rating. See M100 pipe tables for the maximum pipe DN/OD at a given SDR rating. Contact us for specific requirements.
