Alcohol Wipes
Alcohol wipes contain 100 sheets of a non-woven single use cloth, pre-impregnated with a solution of 90% isopropyl alcohol and 10% water and are used for removing contamination on pipe spigots and inside electrofusion couplers prior to electrofusion.
|
P0.466.4 |
90% Isopropyl Alcohol Wipes |
Tub of 100 |
Ex-Stock |
|
Product Code |
Description |
Quantity |
Availability in Hong Kong |
Spigot Peeling
Manually operated rotary peeling tools designed specifically for the removal of the outer surface of PE pipe spigots prior to electrofusion welding. Peelers incorporate a replaceable cutting insert peel approximately 0.2 - 0.4mm per peel from the spigot surface.
Long peelers allow for the full width of the coupler to be peeled on one of the spigot ends. This allows the interference fit between the pipe and coupler to peeled away, so the coupler can be slid back flush with one pipe end and allow another pipe or fitting to be inserted. This is necessary where the existing pipe ends are fixed such as in a repair situation or when inserting the final fitting to connect to installed pipes.
|
Product Code |
Description |
Outside Diameter |
Availability in Hong Kong |
|
P9.621.020063 |
Friatool Mechanical Peeler FWSG 63 |
20-63mm |
Ex-Stock |
|
P9.620.063315 |
PrepMaster Mechanical Peeler |
63-315mm |
Ex-Stock |
|
P9.620.090400 |
PrepMaster Mechanical Peeler |
90-400mm |
8-12 Weeks |
|
P9.620.110500 |
PrepMaster Mechanical Peeler |
110-500mm |
8-12 Weeks |
|
P9.620.250710 |
PrepMaster Mechanical Peeler |
250-710mm |
8-12 Weeks |
|
P9.622.250710 |
Friatool Mechanical Long Peeler FWSG 710L |
225-710mm |
8-12 Weeks |
|
P9.621.630900 |
Friatool Mechanical Peeler FWSG 900 |
630-900mm |
8-12 Weeks |
|
P9.621.8001200 |
Friatool Mechanical Peeler FWSG XL |
800-1200mm |
8-12 Weeks |
Welding Machines
Mill-Pro supplies Friamat Prime electrofusion units for the welding of all Friatec electrofusion products up to 900 OD and the high power 400v Friamat XL for larger fittings. Robust and lightweight machines complete with barcode scanner, data logging, clear display for easy operator guidance, Chinese language selection, temperature compensation, manual emergency entry and extra-long power and fusion cables.
Friamat Prime data sheet
Friamat XL data sheet
|
Product Code |
Description |
Availability in Hong Kong |
|
P9.710 |
Friamat Prime Electrofusion Machine c/w scanner |
Ex-Stock |
|
P9.711 |
Friamat XL Electrofusion Machine c/w scanner |
8-12 Weeks |
|
P9.715 |
Friamat Barcode Scanner (spare) |
8-12 Weeks |
|
P9.720 |
Friamat 4.0mm Electrofusion Contacts (spare) |
8-12 Weeks |
|
P9.721 |
Friamat 4.7mm Electrofusion Adapters (spare) |
8-12 Weeks |
Accessories
A variety of essential accessories required for electrofusion jointing on site.
|
Product Code |
Description |
Size / Qty / OD |
Availability in Hong Kong |
|
P9.701.5 |
Marker Pens (Silver) |
10 pcs/box |
Ex-Stock |
|
P9.594.090250 |
End Protection Bag (kit) S – 40 bags + 1 roll of tape |
90-250mm |
Ex-Stock |
|
P9.594.250400 |
End Protection Bag (kit) M – 25 bags + 1 roll of tape |
250-400mm |
Ex-Stock |
|
P9.594.450500 |
End Protection Bag (kit) L – 18 bags + 1 roll of tape |
450-500mm |
Ex-Stock |
|
P9.594.560710 |
End Protection Bag (kit) XL – 12 bags + 1 roll of tape |
560-710mm |
Ex-Stock |
|
P9.590.630 |
Circumference Tape – Plastic Non-Calibrated Mill-Pro |
630mm |
Ex-Stock |
|
P9.592.630 |
Circumference Tape – Metal Calibrated |
630mm |
Ex-Stock |
|
P9.700.100 |
Friatool Maintenance spray PSFP |
100ml |
Ex-Stock |
Pipe Re-rounding
Manual clamps are designed for use on pipe and fabricated fittings prior to electrofusion where ovality is present either due to manufacture or storage. They are designed to ensure the pipe is circular to allow it to be successfully inserted it into the coupler.
|
Product Code |
Description |
Outside Diameter |
Availability in Hong Kong |
|
P9.640.225 |
Re-rounding – Split Collar Type |
225mm |
8-12 Weeks |
|
P9.640.255 |
Re-rounding – Split Collar Type |
255mm |
8-12 Weeks |
|
P9.641.315 |
Re-rounding – Segmented Collar Type with Ratchet |
315mm |
8-12 Weeks |
|
P9.646.315280 |
Reducing Shells (2 pieces) for part: P9.641.315 |
315-280mm |
8-12 Weeks |
|
P9.641.400 |
Re-rounding – Segmented Collar Type with Ratchet |
400mm |
8-12 Weeks |
|
P9.646.400315 |
Reducing Shells (2 pieces) for part: P9.641.400 |
400-315mm |
8-12 Weeks |
|
P9.646.400355 |
Reducing Shells (2 pieces) for part: P9.641.400 |
400-355mm |
8-12 Weeks |
|
P9.641.355 |
Re-rounding – Segmented Collar Type with Ratchet |
355mm |
8-12 Weeks |
Pipe Re-rounding – Hydraulic
Hydraulic clamps are design for use on larger pipes where manual force is insufficient to re-round the pipe or fabricated fitting before electrofusion. Clamps come complete with built in hydraulic pump and can be varied by addition of reducing shells.
|
Product Code |
Description |
Outside Diameter |
Availability in Hong Kong |
|
P9.642.400 |
Hydraulic Re-rounding Clamp + pump |
400mm |
8-12 Weeks |
|
P9.645.400355 |
Reducing Shells (3 pieces) for part: P9.642.400 |
400-355mm |
8-12 Weeks |
|
P9.645.400315 |
Reducing Shells (3 pieces) for part: P9.642.400 |
400-315mm |
8-12 Weeks |
|
P9.642.500 |
Hydraulic Re-rounding Clamp + pump |
500mm |
8-12 Weeks |
|
P9.645.500450 |
Reducing Shells (3 pieces) for part: P9.642.500 |
500-450mm |
8-12 Weeks |
|
P9.645.500400 |
Reducing Shells (3 pieces) for part: P9.642.500 |
500-400mm |
8-12 Weeks |
|
P9.642.630 |
Hydraulic Re-rounding Clamp + pump |
630mm |
8-12 Weeks |
|
P9.645.630560 |
Reducing Shells (3 pieces) for part: P9.642.630 |
630-560mm |
8-12 Weeks |
|
P9.645.630500 |
Reducing Shells (3 pieces) for part: P9.642.630 |
630-500mm |
8-12 Weeks |
|
P9.642.710 |
Hydraulic Re-rounding Clamp + pump |
710mm |
8-12 Weeks |
|
P9.645.400355 |
Reducing Shells (3 pieces) for part: P9.642.710 |
710-630mm |
8-12 Weeks |
|
P9.642.800 |
Friatool Hydraulic Re-rounding Clamp + pump FWXRH |
800mm |
8-12 Weeks |
|
P9.642.900 |
Friatool Hydraulic Re-rounding Clamp + pump FWXRH |
900mm |
8-12 Weeks |
Pipe Re-rounding and Insertion Clamps – Hydraulic
A combined pair of hydraulic re-rounding clamps with a lateral insertion hydraulic ram. These clamps are designed to re-round both pipes ends and hydraulically insert the round pipes into the coupler between the clamps and hold it in position during welding. In larger pipe sizes (≥ 400 OD) where the risk of a poor weld becomes exponentially expensive due to the high cost of couplers and replacement, this clamp arrangement significantly reduces installation risk.
|
Product Code |
Description |
Outside Diameter |
Availability in Hong Kong |
|
P9.643.400 |
Re-round & Hydraulic Positioning Kit + 2 x pump |
400mm |
8-12 Weeks |
|
P9.643.500 |
Re-round & Hydraulic Positioning Kit + 2 x pump |
500mm |
8-12 Weeks |
|
P9.643.630 |
Re-round & Hydraulic Positioning Kit + 2 x pump |
630mm |
8-12 Weeks |
|
P9.643.710 |
Re-round & Hydraulic Positioning Kit + 2 x pump |
710mm |
8-12 Weeks |
Saddle Peeling
A range of tools for the preparation of pipe surfaces for saddle connections. These mechanical peelers provide the uniform removal of surface material to prepare the PE pipe for the welding of side fusion off takes or EF saddles. Peelers incorporate a replaceable cutting insert peel approximately 0.2 - 0.4mm per peel from the pipe surface.
|
Product Code |
Description |
Outside Diameter |
Availability in Hong Kong |
|
P9.623.110 |
Friatool Mechanical saddle scraper FWSG SE 110 |
110mm |
Ex-Stock |
|
P9.623.160 |
Friatool Mechanical saddle scraper FWSG SE 160 |
160mm |
Ex-Stock |
|
P9.623.250 |
Friatool Mechanical saddle scraper FWSG SE 250 |
250mm |
Ex-Stock |
|
P9.623.280 |
Friatool Mechanical saddle scraper FWSG SE 280 (280 OD) |
280mm |
Ex-Stock |
|
P9.624.004 |
Friatool Replacement Blade kit FWSGE 4 (spare) |
800mm |
Ex-Stock |
|
P9.624.005 |
Friatool Replacement Blade kit FWSGE 5 (spare) |
900mm |
Ex-Stock |
|
P9.624.008 |
Friatool Replacement Blade kit FWSGE 8 (spare) |
400-355mm |
Ex-Stock |
|
P9.624.012 |
Friatool Replacement Blade kit FWSGE 12 (spare) |
400-315mm |
Ex-Stock |
Saddle Clamping & Drilling
Equipment for the fusing, drilling and testing of saddles when using the FRIALEN XL Friafit off take saddle fittings and repair patches.
|
Product Code |
Description |
Outside Diameter |
Availability in Hong Kong |
|
P9.702 |
Friatool Vacuset XL – Vacuum Clamping Unit |
8-12 Weeks | |
|
P9.703.250 |
Friatool Pressko plunger for vacuset SA-XL |
250mm |
8-12 Weeks |
|
P9.704.250 |
Friatool Drilling Equipment FWAB XL |
250mm |
8-12 Weeks |
|
P9.705 |
Friatool Clamping & Drilling Unit for ASA-TL/KG FWFIT |
8-12 Weeks | |
|
P9.706 |
Friatool Clamping Unit for ASA saddles ASATOP |
8-12 Weeks |
Manual Scrapers
Robust and easy to use hand tools for manual scraping of PE pipe prior to electrofusion where mechanical peelers cannot be used.
|
Product Code |
Description |
Size |
Availability in Hong Kong |
|
P9.613.038 |
Hand Scraper Blade (spare) |
38mm |
Ex-Stock |
|
P9.613.065 |
Hand Scraper Blade (spare) |
65mm |
Ex-Stock |
|
P9.610.038 |
Hand Scraper |
38mm |
Ex-Stock |
|
P9.610.065 |
Hand Scraper – Wide |
65mm |
Ex-Stock |
|
P9.611.3 |
Hand Profuse Scraper – Plastic |
Ex-Stock |
